Role of emulsifier on the particle size and polymer particle size distribution using multiwavelength spectroscopy measurements

Latex emulsions depend strongly on the polymer composition, and particle size distribution, which in turn, is a function of the preparation of the latex and on the formulation and composition variables. This study reports measurements of particle size and particle size distribution of latex emulsions as function of the reaction time and the type and concentration of emulsifier by using the multiwavelength spectroscopy technique. Results show changes in the particle size of latex emulsions with the reaction time, obtaining larger particles and broader distributions with increasing of Tween 80 ratio. The steric stabilization provides the sole nonionic emulsifier is not enough to protect the polymer particle, causing the flocculation among the interactive particles, resulting in unstable latex. However, latex emulsions prepared with Tween 80 ratio <70 wt.% can stabilize efficiently the nucleated particles, probably due to the effects provided by both, the electrostatic and steric stabilization mechanisms. The same effect is shown in the curves of conversion (%) as a function of reaction time, resulting in slower polymerization rate for Tween 80 ratio >70 wt.%. On the other hand, smaller polymer particles, in all range of emulsifier mixture, have been obtained to higher emulsifier concentration.     

A self‐adaptive intelligence gray prediction model with the optimal fractional order accumulating operator and its application

The self‐adaptive intelligence gray predictive model (SAIGM) has an alterable‐flexible model structure, and it can build a dynamic structure to fit different external environments by adjusting the parameter values of SAIGM. However, the order number of the raw SAIGM model is not optimal, which is an integer. For this, a new SAIGM model with the fractional order accumulating operator (SAIGM_FO) was proposed in this paper. Specifically, the final restored expression of SAIGM_FO was deduced in detail, and the parameter estimation method of SAIGM_FO was studied. After that, the Particle Swarm Optimization algorithm was used to optimize the order number of SAIGM_FO, and some steps were provided. Finally, the SAIGM_FO model was applied to simulate China's electricity consumption from 2001 to 2008 and forecast it during 2009 to 2015, and the mean relative simulation and prediction percentage errors of the new model were only 0.860% and 2.661%, in comparison with the ones obtained from the raw SAIGM model, the GM(1, 1) model with the optimal fractional order accumulating operator and the GM(1, 1) model, which were (1.201%, 5.321%), (1.356%, 3.324%), and (2.013%, 23.944%), respectively. The findings showed both the simulation and the prediction performance of the proposed SAIGM_FO model were the best among the 4 models.     

Simulation Study of Passive Rod Diffusion in Active Bath: Nonmonotonic Length Dependence and Abnormal Translation-Rotation Coupling

Diffusion of tracer particles in active bath has attracted extensive attention in recent years. So far, most studies have considered isotropic spherical tracer particles, while the diffusion of anisotropic particles has rarely been involved. Here we investigate the diffusion dynamics of a rigid rod tracer in a bath of active particles by using Langevin dynamics simulations in a two-dimensional space. Particular attention is paid to how the translation (rotation) diffusion coefficient \begin{document}$ D_{ \rm{T}} $\end{document} (\begin{document}$ D_{ \rm{R}} $\end{document}) change with the length of rod \begin{document}$ L $\end{document} and active strength \begin{document}$ F_{ \rm{a}} $\end{document}. In all cases, we find that rod exhibits superdiffusion behavior in a short time scale and returns to normal diffusion in the long time limit. Both \begin{document}$ D_{ \rm{T}} $\end{document} and \begin{document}$ D_{ \rm{R}} $\end{document} increase with \begin{document}$ F_{ \rm{a}} $\end{document}, but interestingly, a nonmonotonic dependence of \begin{document}$ D_{ \rm{T}} $\end{document} (\begin{document}$ D_{ \rm{R}} $\end{document}) on the rod length has been observed. We have also studied the translation-rotation coupling of rod, and interestingly, a negative translation-rotation coupling is observed, indicating that rod diffuses more slowly in the parallel direction compared to that in the perpendicular direction, a counterintuitive phenomenon that would not exist in an equilibrium counterpart system. Moreover, this anomalous (diffusion) behavior is reentrant with the increase of \begin{document}$ F_{ \rm{a}} $\end{document}, suggesting two competitive roles played by the active feature of bath particles.     

ZIF-8材料的制备及应用进展

沸石咪唑酯骨架材料(Zeolitic Imidazolate Framework-8,ZIF-8)是由Zn（Ⅱ）与2-甲基咪唑配位自组装形成的多孔结晶材料,具有可调的孔径、高稳定的结构和催化活性等特点,近年来ZIF-8的制备和应用展现出巨大的潜力并引起了广泛关注。本文总结了目前ZIF-8的制备方法,在此基础上介绍了ZIF-8的形成机理及粒径调控方法,重点综述了ZIF-8及其复合材料在吸附分离、催化、生物医学等领域应用的研究进展,并展望了其应用前景与发展方向,以期为ZIF-8 的应用发展开拓新的思路。     

高能量粒子再分布模型在CFETR上的应用

在中国聚变工程实验堆(CFETR)设计参数下,利用一种高能量粒子(EP)物理简化模型分析了磁流体动力学(MHD)不稳定中新经典撕裂模(NTM)引起的粒子再分布和损失。相位矢量旋转法利用EP相空间中小间隔区域内跟踪探测粒子对来判定粒子轨道随机与否,即记录连接矢量旋转角的方法标记该区域是否存在KAM面破缺,以此为据修正相空间的粒子分布函数和判断粒子损失。利用相空间探测粒子对相位矢量旋转法标记一定NTM幅度下的随机区域分布并迭代得到稳态分布剖面。对捕获粒子区域的共振岛探测结果表明,低频或零频率扰动不会与高能量α粒子形成有效共振,MHD扰动和有效碰撞效应可能使捕获-通行轨道边界附近形成损失通道。     

Efficient Synthesis of Submicrometer-Sized Active Pharmaceuticals by Laser Fragmentation in a Liquid-Jet Passage Reactor with Minimum Degradation

One challenge in the development of new drug formulations is overcoming their low solubility in relevant aqueous media. Reducing the particle size of drug powders to a few hundred nanometers is a well-known method that leads to an increase in solubility due to an elevated total surface area. However, state-of-the-art comminution techniques like cryo-milling suffer from degradation and contamination of the drugs, particularly when sub-micrometer diameters are aspired that require long processing times. In this work, picosecond-pulsed laser fragmentation in liquids (LFL) of dispersed drug particles in a liquid-jet passage reactor is used as a wear-free comminution technique using the hydrophobic oral model drugs naproxen, prednisolone, ketoconazole, and megestrol acetate. Particle size and morphology of the drug particles are characterized using scanning electron microscopy (SEM) and changes in particle size distributions upon irradiation are quantified using an analytical centrifuge. The findings highlight the superior fragmentation efficiency of the liquid-jet passage reactor setup, with a 100 times higher fraction of submicrometer particles (SMP) of the drugs compared to the batch control, which enhances solubility and goes along with minimal chemical degradation (<1%), determined by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), high-performance liquid chromatography (HPLC), and X-ray diffraction (XRD). Moreover, the underlying predominantly photo-mechanically induced laser fragmentation mechanisms of organic microparticles (MP) are discussed.     

Diffusiophoresis in suspensions of highly charged soft particles

Diffusiophoresis phenomenon of aoft particles suspended in binary electrolyte solutions is explored theoretically in this study based on the spherical cell model, focusing on the chemiphoresis component in absence of diffusion potential. Both the electrostatic and hydrodynamic aspects of the boundary confinement, or steric effect, due to the presence of neighboring particles are examined extensively under various electrokinetic conditions. Significant local extrema are found in mobility profiles expressed as functions of the Debye length in general, synchronized with the strength of the motion-inducing double layer polarization. Moreover, a seemingly peculiar phenomenon is observed that the soft particles may move faster in more concentrated suspensions. The competition between the simultaneous enhancement of the motion-inducing electric driving force and the motion-retarding hydrodynamic drag force from the boundary confinement effect of the neighboring particles is found to be responsible for it. The above findings are also demonstrated experimentally in a very recent study on the diffusiophoretic motion of soft particles through porous collagen hydrogels. The results presented here are useful in various practical applications of soft particles like drug delivery.     

Approximate analytic expressions for the diffusiophoretic velocity of a spherical colloidal particle

The general expression is derived for the diffusiophoretic velocity of a spherical colloidal particle of radius a in a concentration gradient of symmetrical electrolyte. On the basis of this expression, simple approximate analytic expressions for the diffusiophoretic velocity correct up to the order of 1/κa is derived, where κ is the Debye-Hückel parameter. It is found that the approximate expression correct to order unity can be applied for κa ≥ 50 with negligible errors, while the approximate expression correct to order 1/κa can be applied for κa ≥ 20 with negligible errors.     

Elastic-inertial separation of microparticle in a gradually contracted microchannel

Separation of microparticle in viscoelastic fluid is highly required in the field of biology and clinical medicine. For instance, the separation of the target cell from blood is an important prerequisite step for the drug screening and design. The microfluidic device is an efficient way to achieve the separation of the microparticle in the viscoelastic fluid. However, the existing microfluidic methods often have some limitations, including the requirement of the long channel length, the labeling process, and the low throughput. In this work, based on the elastic-inertial effect in the viscoelastic fluid, a new separation method is proposed where a gradually contracted microchannel is designed to efficiently adjust the forces exerted on the particle, eventually achieving the high-efficiency separation of different sized particles in a short channel length and at a high throughput. In addition, the separation of WBCs and RBCs is also validated in the present device. The effect of the flow rate, the fluid property, and the channel geometry on the particle separation is systematically investigated by the experiment. With the advantage of small footprint, simple structure, high throughput, and high efficiency, the present microfluidic device could be utilized in the biological and clinical fields, such as the cell analysis and disease diagnosis.     

磁粒子成像示踪剂的研究进展

磁粒子成像是基于功能和断层影像技术检测磁性纳米粒子空间分布的示踪方法, 具有正向的对比信号、 较低的组织背景、 无限的组织穿透深度、 非侵入性成像以及无电离辐射等优点, 是近年来一种很有前途的生物医学成像技术. 磁粒子成像信号是通过在无场点切换磁性纳米粒子的磁自旋矢量来产生的. 磁粒子成像的灵敏度和空间分辨率都高度依赖于作为磁粒子成像示踪剂的磁性纳米粒子本身的磁性能, 因此目前的研究主要集中在磁性纳米粒子的设计和合成上. 本文重点介绍了磁粒子成像示踪剂的最新研究进展, 总结了可作为磁粒子成像示踪剂的磁性纳米粒子的种类、 合成方法、 性能以及生物医学应用, 以期为磁粒子成像的未来研究提供参考.